Frequently Asked Questions

We are Kaeser’s authorized distributor for the entire state of Montana as well as Northern Wyoming and Western North Dakota.

We are kaeser’s authorized distributor for our region, but our technicians can service most major brands.

A preventative maintenance schedule varies based on the compressor’s enviroment, run hours and ambient temperature. We will use the manufacturer’s guidelines to make an  appropriate maintenance schedule based on these factors.

We do have portable and stationary rental units availble. Please contact us for availability.

Email: [email protected]

Call or Text: 406-581-1740

We provide complete air system sales, design, installation and maintenance. We create the best solution for your air system needs.

Our lead time is typically 2 weeks, but that can vary due to different circumstances. Please email or call us for an upto date answer.

Our team can handle a variety of materials, but typically we work with carbon steels, stainless steels and aluminum.

At this time we do not have any current openings. But please fill out the online application as we are always looking to improve our team.

Our shop can handle a large range of part sizes. The main concern is our employees’ safety. Email or call us to see if we can fit your project in our shop.

Yes. We have a mobile weld truck that allows us to weld on site.

No. We are not properly setup for automotive parts. There are other shops in the area that are better suited for that.

Our biggest 3-axis machine can handle parts upto 20″ tall x 30″ wide x 60″ long.

Our specialty is Aluminum, but we are also able to work with most plastics, carbon steels and stainless steels. We cannot work with hardened steels like Titanium or Inconel.

We can hold down to ±0.0005″

We can make however many parts needed. From small batches and one-offs to setting up an on-going production run.

All parts should be disassembled, and any materials that will melt in a 400-degree oven need to be removed before drop off. We will sandblat or steam clean the parts before coating.

We generally have a week and half lead time, but during the busy summer months our lead time can increase to 3 weeks.

Yes. The current condition of the existing powder coat will determine how we proceed with the new powder coat.

We suggest using warm water with a mild soap and a soft cloth. Do not use harmful chemicals like brake cleaner, acetone, etc.

You can, but most paints will chip rather quickly. Powder coating uses a small electrostatic charge to bind the powder particles to the material resulting in a longer lasting and tougher coating.

We only sell Western snowplows, but we can service any brand.

We will figure out the correct plow for your needs, then set up a drop off date. Once your vehicle is dropped off, our techs will bring it in and install all neccessary parts followed by a thorough inspection.

No. We offer a wide range of plow sizes to accomidate your needs.

Yes. We have a full stock of replacement parts, and if we don’t have what you need in stock then we can get the correct part on order for you.

Yes, but the financing is for businesses only. There is a finance page on our “Resources” page.

We install bumpers, tow hitches, plow mounts, etc. onto your vehicle. We customize company vans with modular storage systems. We also repair and maintain your trailer(s).

We install B&W hitches and other hitches provided through etrailer.com

Yes. Give us the make, model and year of your vehicle and we will find the correct hitch for your vehicle and install it.

Yes. We work on a variety of trailers, from small ulitity trailers to large stock trails and everything inbetween.

We can repack bearings, swap out axles, repair wiring harnesses, etc. We can also set up a maintenance schedule if you have a fleet of trailers.